Silicon CPV plc
Akhter House, Perry Road, Harlow, Essex, CM18 7PN, UK
Tel +44 (0) 1279 821200 Email [email protected]
Page 26 of 32
3.
Using a new battery and controller pack reverse the removal
process to install the new pack.
4.
Place the unit in TEST mode, slide the battery pack in and check
correct operation of the light source
5.
If the light works correctly, remove the battery and controller and
change the mode to ON, ensuring the rubber plug is re-inserted
after inspection to prevent water ingress.
Insertion and removal of Battery and Controller Pack
Push the battery and controller pack in the direction of the arrow
