Silicon CPV plc
Akhter House, Perry Road, Harlow, Essex, CM18 7PN, UK
Tel +44 (0) 1279 821200 Email [email protected]
Page 23 of 32
Battery and Controller Pack Replacement for Kamr
To replace the Solar Street Light battery bank
and controller please follow the steps below.
Failure to follow the instructions below may
result in the light failing to operate correctly.
Battery Bank and Controller Removal
1.
Set mode switch to “SHIP”
2.
Remove the two pozi screws that secure the battery pack and
controller to the main light body
Correct Screws Holes for the two pozi screws
3.
Carefully slide the battery and controller pack out until the wires are
visible. Be careful not to pull out the pack too far, the connections
to the Solar panel and LED light head are in place.
