Silex technology DS-700AC, User Manual

Page: 59 / 200

5. Configuration
51
WLAN LED : ON
DS-700AC
Check that the
WLAN LED
turns Green.
3.
- In the following cases, DS-700AC is not connected to a wireless network.
- If the POWER LED is off, DS-700AC is not powered on. Check that the AC adaptor is plugged in properly.
- If the WLAN LED blinks orange, DS-700AC is still searching for a wireless network. Please wait for a
while.
If the WLAN LED does not turn Green within 2-3 min, DS-700AC's wireless settings may not have been
configured properly. In such a case, go back to
3-2. Necessary Wireless Setting Information and check
the wireless setting information once again.
- If the Wireless LED is off, the network cable is plugged in.
If you plan to use DS-700AC in a wireless network, go back to step1 at 5-1-3. Enable the new settings .
If you plan to use DS-700AC in a wired network, check the WLAN LED turns off.
Tip
- If you plan to use the Device Server feature, click
Yes
.
- In the following cases, click
No
. SX Virtual Link does not need to be installed.
- If you do not plan to use the Device Server feature from the PC used for this setup.
- If you will only use a printer with standard Windows printing.
Tip
Select
Yes
or
No
and click
Finish
.
4.
The setup is now complete.