Silex technology DS-700AC, User Manual

Page: 50 / 200

42
DS-700AC User's Manual
5-1. Configuration via a Network Cable (Recommended)
This page explains how to connect DS-700AC to your existing network using a network cable and
configure from your PC.
The following items are required in order to connect DS-700AC to a network.
Wireless Router
(Ethernet HUB)
Use to connect DS-700AC and other network devices such as a PC.
When there are available LAN ports on the network in which DS-700AC
is to be installed, you do not have to purchase a new Ethernet Hub or
broadband router as DS-700AC can be connected to the available LAN
port.
Network Cable
Use to connect DS-700AC and network devices such as an Ethernet Hub,
broadband router and PC.
USB Cable
Use to connect DS-700AC and USB devices.
A USB Cable is not required if the device is the one that connects itself
directly to a USB port (e.g. USB memory) or there is a bundled USB cable.
-In a 100BASE-TX environment, please use Ethernet Hub and network cable that support 100BASE-TX network
(category 5 or above).
-In a 1000BASE-T environment, please use Ethernet Hub and network cable that support 1000BASE-T network
(category 5e or above).
-For a USB cable, it is recommended to use the one with a USB logo certification.
-The USB3.0 port of DS-700AC does not support connection with a USB HUB, USB HUB embedded device and
USB video converter.
TIP
5-1-1
. Necessary Items