Silex technology DS-700AC User Manual Download Page 174

Page: 174 / 200

166

DS-700AC User's Manual

8-7. Using SX Virtual Link Lite

USB device is automatically connected when PC is turned on

By registering USB device at SX Virtual Link Lite Setting, it can automatically be connected when the

PC is powered on.

You will not have to start SX Virtual Link to connect the USB device.

PC logon is not necessary

USB device can be connected just by turning on PC. Logon is not necessary then.

Auto connection recovery

When the USB device connection is lost as the device server is turned off, etc., it will be reconnected
automatically when the device server is turned on again.

This page explains the USB device connection service "SX Virtual Link Lite" to use DS-700AC.

SX Virtual Link Lite is a utility that runs as Windows service.

- When SX Virtual Link Lite fails to connect the USB device, reconnection does not perform. Also, error message

is not displayed then.

- As long as the USB device is connected by SX Virtual Link Lite, it is impossible to connect such device by other

utility such as SX Virtual Link.

TIP

8-7-1. What is SX Virtual Link Lite?

Difference from SX Virtual Link

Summary of Contents for DS-700AC








































































































































































































Search results

Summary of Contents for DS-700AC

Reviews:

Brands by name

Popular brands

Silex technology DS-700AC, User Manual

Search results

Summary of Contents for DS-700AC

Reviews:

Brands by name

Popular brands