Silex technology BR-330AC-LP, User Manual

Page: 29 / 106

3. Before You Begin
23
Multi-Client Mode
Use this mode when you connect multiple non-wireless devices to BR-330AC-LP.
By using a HUB on the LAN port, up to 16 devices can be connected.
For wireless LAN connection, the MAC address of the BR-330AC-LP and the IP address of
the connected device will be used.
HUB
Printer
Monitoring camera
(Non-wireless devices)
Wireless Router
LAN Cable
BR-330AC-LP
- The devices with multiple MAC addresses cannot be used.
- When Multi-Client Mode is on, only IPv4 and IPv6 are supported. The following protocols are not supported.
- Protocols with a mechanism to check the source MAC address
- Protocols with a system to run with a MAC address that is contained in the packet data
TIP
MAC address of the BR-330AC-LP and
IP address of the connected device
are used for wireless connection.
Up to 16 non-wireless devices can be
connected using a HUB.