Silex technology BR-330AC-LP, User Manual

Page: 45 / 106

4. How to Configure BR-330AC-LP
39
2.
Connect the AC adapter to the BR-330AC-LP and the AC plug to the outlet.
3.
- Depending on the non-wireless device you have connected, further network settings may need to be
configured to that device. In such a case, please configure it according to the operating manual that came
with your device.
- When you turn on the BR-330AC-LP and your non-wireless device, be sure to turn on the BR-330AC-LP first.
Do not press the push switch then.
Note
Turn on the non-wireless device connected to the BR-330AC-LP.
During the MAC address resolution, the WLAN LED and STATUS LED will flash alternately.
When the LED status has changed from it, the BR-330AC-LP will be ready to configure
using Smart Wireless Setup.
BR-330AC-LP
Confirm these LEDs
are blinking
AC adapter
Electrical Outlet
(1)
(2)
BR-330AC-LP
LAN Cable