Silex technology BR-330AC-LP, User Manual

Page: 100 / 106

94
BR-330AC-LP User's Manual
Advanced - Advanced Configuration - Wireless LAN Configuration
Roaming Threshold
Details
Set the roaming threshold value (1 to 60).
If a greater value is set, frequency of roaming is increased, however,
communication may become unstable.
Range
1 to 60
Default Value
15
Note A time of roaming may take longer depending on the combination with other
settings of BR-330AC-LP.
The following items are displayed when
Client Mode
is
Multi-Client Mode
.
Advanced - Advanced Configuration - Address Management Table Configuration
Address Management Table
Details
Enable/Disable the address management table feature to use in Multi-Client
Mode
(
ON
/
OFF
).
When
ON
is set, combination information of MAC address and IP address will be
used from management tables (IPv4/IPv6) for connected non-wireless devices.
Range ON / OFF
Default Value
OFF
Note
Only unicast address is supported for MAC address and IP address.
BR-330AC-LP checks the existence of device information to save at 5 sec interval. If BR-
330AC-LP is turned off before the saving process is completed, the device information
is not saved in the address management table.
Management Table (for IPv4)
Details
Register combination of MAC address and IP address (IPv4).
Range Up to 16 sets of MAC address and IP address (IPv4)
Default Value MAC address 00:00:00:00:00:00
IP address 0.0.0.0
Management Table (for IPv6)
Details Register combination of MAC address and IP address (IPv6).
Range
Up to 16 sets of MAC address and IP address (IPv6)
Default Value
MAC address 00:00:00:00:00:00
IP address ::
Advanced - Advanced Configuration - Wired LAN Configuration
Link Speed
Details Sets the link speed for the wired network. Usually, "
AUTO
" is used.
Range AUTO / 10BASE-T-Half / 10BASE-T-Full / 100BASE-TX-Half / 100BASE-TX-Full
Default Value
AUTO
Note
If a LINK LED on the connected device does not light on when BR-330AC-LP is
powered on, change the network type to that of the connected device.