Silex technology BR-330AC-LP, User Manual

Page: 15 / 106

2. About BR-330AC-LP
9
- For details on the "AMC Manager®", please visit our homepage.
- To use the "AMC Manager®", an IP address needs to be configured to the BR-330AC-LP.
- BR-330AC-LP can be used in Infrastructure mode only. Ad hoc mode is not supported.
- For a MAC address to use for wireless LAN connection, the MAC address of the BR-
330AC-LP will be used.
Easy access to the Web configuration interface
Without changing the setting of the PC you use for setup, the Web configuration
interface of BR-330AC-LP can easily be accessed.
Wireless Configuration Using a Push Switch
BR-330AC-LP support the wireless configuration using Smart Wireless Setup. If your
wireless router supports WPS (Wi-Fi Protected Setup), you can configure the wireless
settings easily using the push switch.
Supports "AMC Manager® "(non-free program / free program)
BR-330AC-LP supports the total management software, "AMC Manager®" .
The AMC Manager® provides the useful features as follows:
- Remote device control and monitoring
- Bulk configuration and firmware updates
- System time synchronization (version 3.2.0 or later)
If the non-free version of AMC Manager® is purchased, the plug-in utility “BR Kitting
Utility” can be used to configure multiple BR-330AC-LP units at once.
Note
- To use the functions above, your wireless router needs to support the same functions.
Note