4-7
Select Paper Mode as the thermal paper in use.
per Mode
SWDIP3-2
SWDIP3-1
Paper Mode selection
Pa
Cut Paper
0
0
Roll Paper
0
1
Mark Roll Paper
1
0
Reserved 1
1
(
print the thermal paper which be cut by a certain fixed length. The paper
the paper automatically.
ensions.
paper mark after
g the thermal paper from the paper slot, and then becomes print-ready status.
not printed on the back side, the printer stops as an error status after
o paper length which is set. At this time, the printer is in the state waiting
pressed, the thermal paper is
ine and the printer goes print-ready status.
aper feed can be set by Set Default/Set Test Print Header (DC2 'i') command. The default
detection
The printer processes the error operation by lighting the lamp if out-of-paper error detected.
(
per detection
r detected.
e
This mode assumes that to print the thermal paper roll with the printed mark at regular intervals on the
back side which to detect paper position. Refer to 2.2 SPECIFIED THERMAL PAPER SPECIFICATION
for the paper roll dimensions.
(a) Operation of paper detection
In this mode, the printer determines the status as the out-of-paper error by feeding the thermal paper
10mm or longer, if it is less than 10mm, the printer determines the status as the mark and does not
detect the out-of-paper error.
1) Cut Paper mode
This mode assumes that to
should be printed the mark on back side to detect paper position when loading
Refer to 2.2 SPECIFIED THERMAL PAPER SPECIFICATION for the paper dim
(a) Auto loading operation
In this mode, the printer feeds the thermal paper to the set value by detecting the
loadin
When the mark for detection is
feeding the thermal paper up t
for error release by pressing the FEED switch. When the FEED switch is
fed one dot l
Amount of p
is 50 mm.
(b) Process of out-of-paper
2) Roll Paper mode
This mode assumes that to print the thermal paper roll.
(a) Process of out-of-pa
The printer processes the error operation by lighting the lamp if out-of-paper erro
(3) Mark Roll Paper mod
Summary of Contents for DPU-S445 SERIES
