45
AUS
1300 777 137
www.signifyelectronics.com.au
Basic Operations (cont)
Music
Once in the MUSIC menu, highlight the desired USB storage device by using the / buttons and then pressing
the
OK
button to enter.
NOTE:
If only one USB storage device is inserted into the TV, the device's on- screen display name will be "C". If
two USB storage devices are inserted into the TV, the on-screen display names will be "C" and "D".
1. Once in the appropriate folder, highlight the desired audio file by using the / buttons and then press the
/
to begin a playlist.
NOTE:
The TV will play all audio files within the folder, unless specific files are pre-selected. To pre-select specific
photos, highlight them by using the / buttons and then press the
OK
button on the remote to finalise selection.
A red tick appears in the bottom right corner of the audio file's thumbnail indicating selection for the playlist. Press
the
/
button to start a slide show.
2. Navigate through the below on-screen by pressing the / buttons on the remote and then pressing the
OK
button to activate the corresponding function.
Play/Pause the audio file. This function can also be activated by pressing the
/
button on the
remote.
Rewind the current audio file by up to 4 speeds: 2x, 4x, 8x, 16x. This function can also be activated
by pressing the
button on the remote.
Fast forward the current audio file by up to 4 speeds: 2x, 4x, 8x, 16x. This function can also be
activated by pressing the
button on the remote.
Skip to the previous audio file. This function can also be activated by pressing the
button on the
remote.
Skip to the next audio file. This function can also be activated by pressing the
button on the
remote.
Stop/Exit the playlist. This function can also be activated by pressing the button on the remote.
Repeat ALL: Continuously plays the playlist, repeating all audio files until manually stopped.
Repeat None: Plays the playlist only once. After the last audio file has been played, the TV will
automatically Stop/Exit the playlist.
Repeat 1: Continuously plays the same audio file over until the playlist is manually stopped, or the
function is changed to Repeat ALL or Repeat None.
This function can also be activated by pressing the yellow button on the remote.
Mute the audio file. This function can also be activated by pressing the
MUTE
button on the remote.
