6
9900 Transmitter
Mfr. Part No. Code
Description
3-9900.397
159 310 163
Batch Module
Convert a 9900-1P Transmitter (Generation II** or later) into a Batch Controller system by
utilizing a Batch Module (3-9900.397) and a Relay Module (3-9900.393).
Optional Module Wiring:
●
Wire an external button or keypad (customer supplied) to stop, start or resume
a batch remotely.
●
*Wire an external input that can inhibit a batch from starting.
Full 9900-1BC Batch Controller System manual available at www.gfsignet.com
Mfr. Part No. Code
Description
3-9900.398-1 159 001 784
4 to 20 mA Output Module
The optional 4 to 20 mA Output Module adds an additional 4 to 20 mA loop output to a
Signet 9900 Transmitter (Panel or Field Mount). Requires the 9900 Generation III** or later.
Features:
●
4 to 20 mA Output Module can be powered using Loop Power or DC Power in the
9900 base unit.
●
Independent settings for the loop currents of the Output Module and 9900 base unit
(Error, Loop Adjustments, etc.).
●
The Primary or Secondary (if applicable) measurement of a compatible sensor can
be selected as the loop source.
●
The same source (Primary or Secondary measurement) can be used for Loop 1 in
the 9900 base unit and Loop 2 in the Output Module.
+
–
+
–
+
–
Loop2+
PWR–
PWR+
Loop+
Loop–
Red
Blue
Black
Loop2–
Blue
Power Supply
10.8 to 35.2 VDC
PLC or Recorder
Loop 1 Input
4 to 20 mA
PLC or Recorder
Loop 2 Input
4 to 20 mA
** NOTE:
Verify 9900 Transmitter
generation in the
OPTIONS Menu.
NOTE:
The 4 to 20 mA Output,
Direct Conductivity, and
Batch Modules share the
same installation site on
the 9900 base units.
Only one of these
modules can be used
per 9900 Transmitter.
Common
Start
Stop
Resume
Inhibit*
3-9900.397
Batch Module
Start
Resume
Common
Stop/Inhibit
NOTE:
The Output Module can
run on Loop Power.
Batch Module
4 to 20 mA Output Module
