Managed Ethernet Switch
User’s Manual 136
Port Based VLAN
Switchport portbase add/remove vlan:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use this command to set or remove the default VLAN for the interface.
3.
Command Syntax:
switchport portbase add
｜
remove vlan VLANID
VLANID The ID of the VLAN will be added to or removed from the Layer-2
interface.
4.
Example:
The following example specifies to
add
the interface fe1 (port 1) to VLANID
(
2
):
switch_a(config)#interface fe1
switch_a(config-if)#switchport portbase add vlan 2
switch_a(config-if)#
Summary of Contents for 065-7734
