Managed Ethernet Switch
User’s Manual 126
GROUP <1-1> Specify the bridge-group ID.
HOP_COUNT Maximum hops the BPDU will be valid for.
4.
Example:
The following example specifies the maximum allowed hops (
25
) for BPDU in
bridge GROUP (
1
):
switch_a(config)#bridge 1 max-hops 25
switch_a(config)#
MSTP Instance Setting
Bridge Instance VLAN:
1.
Command Mode: MST Configuration mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to MST Configuration mode.
The
switch_a(config-mst)#
prompt will show on the screen.
switch_a(config)#spanning-tree mst configuration
switch_a(config-mst)#
2.
Usage:
Use this command to simultaneously add multiple VLANs for the
corresponding instance of a bridge. This command can be used only after the
VLANs are defined. Use the no parameter with this command to
simultaneously remove multiple VLANs for the corresponding instance of a
bridge.
3.
Command Syntax:
bridge GROUP instance INSTANCE_ID vlan VLAN_ID
no bridge GROUP instance INSTANCE_ID vlan VLAN_ID
GROUP <1-1> Specify the bridge-group ID.
INSTANCE_ID <1-15> Specify the instance ID.
VLAN_ID <1-4094> Specify multiple VLAN IDs corresponding to the bridge
instance
4.
Example:
The following example associates multiple VLANs (
10
) and (
20
) to instance
(
1
) of bridge GROUP (
1
):
switch_a(config)#bridge 1 protocol mstp
switch_a(config)#spanning-tree mst configuration
switch_a(config-mst)#bridge 1 instance 1 vlan 10, 20
switch_a(config-mst)#
Bridge Instance Priority:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
Summary of Contents for 065-7734
