Managed Ethernet Switch
User’s Manual 108
3.
Command Syntax:
(no) duplex MODE
MODE specifies the duplex mode: auto, full, half.
4.
Example:
The following example shows the use of
duplex
MODE (
full
) to the interface
fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#duplex full
switch_a(config-if)#
Flow control:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use
flowcontrol on
command to enable flow control, and configure the flow
control mode for the port.
Use the
no flowcontrol
to disable this function.
3.
Command Syntax:
flowcontrol on
no flowcontrol
4.
Example:
The following example shows the use of
flowcontrol on
to the interface fe1
(port 1):
switch_a(config)#interface fe1
switch_a(config-if)#flowcontrol on
switch_a(config-if)#
Port Status
1.
Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The
switch_a>
or
switch_a#
prompt will show on the screen.
switch_a>
switch_a#
Summary of Contents for 065-7734
