MA MCTS II, Ver. 1.4
4
11/2018
SIGNALTEC GmbH, Reutersbrunnenstrasse 27, D-90429 Nürnberg, GERMANY, T. +49 911 2550993-0, F. +49 911 2550993-13, Email: [email protected], Web: www.signaltec.com
3.
Hardware Installation
The MCTS is delivered with rack mounting brackets for the easy installation into a 19" cabinet. The mounting
brackets can be installed easily with four screws on the left and right side panel. The 19" rack mounting brackets
and the screws are delivered with the system.
3.1. Connection of the current sensor to the MCTS rack
The current transducer will be connected to the MCTS rack with
the delivered D-SUB current transducer connection cable.
3.2. Connection of the current output to an instrument current input terminal
The transducer output current can be directly connected to the
current input terminals of a current or a power meter.
3.3 . Connection of the optional voltage output to an instrument voltage input terminal
Before you connect the current output to the voltage input terminal
of a voltage meter or the sensor input terminal of a power meter
you have to transfer the output current into a voltage signal. For
this purpose, passive plug-on burden resistors and active plug-on
output voltage amplifiers are available.
