MA MCTS II, Ver. 1.4
2
11/2018
SIGNALTEC GmbH, Reutersbrunnenstrasse 27, D-90429 Nürnberg, GERMANY, T. +49 911 2550993-0, F. +49 911 2550993-13, Email: [email protected], Web: www.signaltec.com
Contents
1.
Introduction
2.
Receiving of goods
3.
Hardware Installation
3.1. Connection of the current sensor to the MCTS rack
3.2 . Connection of the current output to an instrument current input terminal
3.3 . Connection of the optional voltage output to an instrument voltage input terminal
4.
Operating instructions
5.
Scaling
5.1. Current output ratio
5.2 . Sensor output ratio when using the passive plug-on resistors
5.3 . Sensor output ratio when using the active plug-on voltage amplifiers
6.
Status readout interface
6.1. Pin-out of the 25-pole D-SUB
7.
Specifications
7.1 . Rack specifications
7.2 . Transducer specifications
7.2.1. Transducers with rms-range
7.2.2. Transducers with peak-range
7.3. Connection cable specifications
7.3.1. Standard Connection Cables
7.3.2. Total Measuring Resistance at Full Scale
7.3.3. Maximum Burden Resistor depending on Transducer and Connection Cable
7.4. Burden module specifications
7.4.1. Passive plug-on burden resistor specifications
7.4.2. Active plug-on voltage amplifier specifications
8.
Switching off and deinstallation
9.
Installation of internal power supplies (channel extension)
10.
Accessories
