SIGMATEK DC 061-1, Manual

Page: 27 / 47

S-DIAS AXIS MODULE DC 061-1
23.08.2019 Page 25
5.2.2 Wiring AKM Motors with Molex Connectors
With Holding Brake Length
M061E-10-1-015-3-0 1.5 m
M061E-10-1-030-3-0 3.0 m
M061E-10-1-050-3-0 5.0 m
M061E-10-1-100-3-0 10.0 m
Without Holding Brake Length
M061E-10-0-015-3-0 1.5 m
M061E-10-0-030-3-0 3.0 m
M061E-10-0-050-3-0 5.0 m
M061E-10-0-100-3-0 10.0 m
The Shielding/PE connections of the motor cable, as well as the encoder cable
shielding must be grounded via the 6.3 mm blade receptacle provided on the respec-
tive cables. With increased interference, it may be necessary to also connect the
motor and encoder cable on the motor side.
If the Molex connector could experience strain during use, it must be equipped with
proper strain relief directly before and after the connector.
5.2.3 Wiring AKM Motors with Y-Tec
With Holding Break Length
M061E-10-1-015-1-0 1.5 m
M061E-10-1-030-1-0 3.0 m
M061E-10-1-050-1-0 5.0 m
M061E-10-1-100-1-0 10.0 m