![background image](http://html1.mh-extra.com/html/sigma/spectrum-35700abb/spectrum-35700abb_service-manual_1267919027.webp)
22
SIGMA Manual Number 41019
Revision AA
Transfer Network Status
This option allows the pump’s network configuration to be sent or received via the pump’s IrDA
port, to or from an IrDA compatible PC. The pump’s network configuration may also be reset, clear-
ing any configured network passwords, returning the pump’s network configuration to the pump’s
default. To configure a pump for use with a facility’s network the pump’s network configuration file
may be modified and sent to the pump via IrDA. The pump serial number located in the network
configuration file must match the serial number of the pump it is being sent to, otherwise the pump
will prevent use of the configuration file. Note that certificate-based authentication modes are not
supported. The default network configuration file, available by pressing ‘send’ on this screen on a
pump after pressing ‘reset’ to reset the configuration, can be found below:
SN=XXXXXX
# Pump serial number - must match SN of receiving pump
# SIGMA Spectrum Settings
[NETWORK CONFIGURATION]
# DHCP=0 DHCP disabled - IP, GATEWAY, NETMASK, and DNS must be valid
# DHCP=1 DHCP enabled - IP, GATEWAY, NETMASK, and DNS must be blank
DHCP=1
IP=
GATEWAY=
NETMASK=
DNS=
# Leave either SIGMAGW or MULTICAST blank
# SIGMAGW set to DNS name or IP address of SIGMA gateway server
SIGMAGW=SIGMAPUMPGW
# MULTICAST group default is 239.237.12.87
MULTICAST=
# DEVICEID set to device alias
# Limited to 20 alpha-numeric characters (0-1,A-Z,a-z), blank is
acceptabl
DEVICEID=
[WIFI CONFIGURATION]
# BSS=0 Infrastructure mode (Access point)
# BSS=1 Join or Create Ad-Hoc (peer-to-peer)
# BSS=2 Join only Ad-Hoc (peer-to-peer)
# BSS=3 Join any
BSS=3
# SSID= set to wireless network name
SSID=sigma_pumps
# CHANNEL=0 search channels
CHANNEL=0
# SECURITY=0 Any available security method
# SECURITY=1 Open system (no-encryption)
# SECURITY=2 WEP shared key
# SECURITY=3 WPA pre-shared key
# SECURITY=4 WPA with 802.1x authentication
# SECURITY=5 WEP with 802.1x authentication
# SECURITY=6 LEAP
SECURITY=0
# WEPKEYINDEX=0-3