24
25
10.5 Sport profiles
You can make the following settings:
10.5.1 Automatic lap
Settings of automatic laps for distance, time or calories.
10.5.2 Automatic pause (on/off)
10.5.3 Training views
This can only be set via the DATA CENTER.
10.5.4 Alert
Alerts can be defined for different purposes (e.g. drink reminder). You always
get a message after the value is set. This can be defined according to distance,
time or calories.
10.5.5 Bike settings
Here you can make your bike settings:
−
Wheel size
−
Bike weight
−
Bike type
10.5.6 Calculation of average values
Here you have the possibility to adjust the average calculation of power and
cadence according to your needs - with or without consideration of the zero
values.
10.5.7 Power zones
The ROX GPS 11.0 has 7 power zones that you can customise to your individual
needs. These will help you to evaluate the training better.
10.5.8 Intensity zones (HR)
The ROX GPS 11.0 has four intensity zones, which make it easier to monitor your
training. The values are automatically calculated on the basis of your maximum
heart rate. You can manually modify the % values for the individual intensity
zones.
10.5.9 GPS (ON/OFF)
10.6 Track setting
10.6.1 Off-track alarm
Press the
PLUS
and
MINUS
buttons followed by the
START
button to select
between the settings 40 m, 80 m or 120 m.
10.6.2 Waypoint alarm
Press the
PLUS
and
MINUS
buttons followed by the
START
button to select
between the settings 40 m, 80 m or 120 m.
10.7 User
Enter your data here to optimise calculations, such as calories or power.
10.8 Gender
To load the appropriate segments in Strava, you must choose between
male or female.
10.9 Firmware update
The ROX GPS 11.0 can be updated. If a new firmware version is available,
you will be informed via the DATA CENTER. Follow the steps as described in
the DATA CENTER.
ATTENTION
Back up all your data
BEFOREHAND
. With a firmware update, all data will be lost
and
CANNOT
be restored!
EN
