8KS
8KBS
6 Using the centrifuge
50
Version 08/2012, Rev. 1.6 of 04/02/2014 • sb
Translation of the original operating manual
System
Cycles
This field shows the number of cycles as well as the runtime of the rotor
and buckets that are currently being used.
Info
This menu provides information on the software versions that are used in
this centrifuge.
Sensor
The sensor mode is reserved for service personnel.
NOTE
In the menus "Cycles", "Info", and "Sensor", the values can neither be
entered nor changed.
Name
In this menu, the identification name of the centrifuge will be defined.
• The characters can be entered when the cursor flashes in the text field.
Turn the function knob in order to select a character and press it to
confirm the selection. Then, press the knob again in order to enter the
next character. Pressing the arrow button will delete the last
character. The maximum number of characters is 19.
• When the name is complete, select the option "Accept" and confirm it.
Buzzer
In this menu, an acoustic/optical signal can be selected for
• the end of a centrifugation run
• an imbalance message
• an error message.
The duration of the buzzer signal can be specified.
External
This function is only available if the centrifuge is equipped with the option
for the input and output of data (external signal, floating switch) (see
chapter 6.3.3.5 - "
Options for data input and output
").
Pos: 156 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1
