8KS
8KBS
6 Using the centrifuge
Version 08/2012, Rev. 1.6 of 04/02/2014 • sb
35
Translation of the original operating manual
Pos: 130 /10 0 Sigm a/11 0 BA Z entrif uge n (Pr ojekt e)/8KS_ 8KBS/060 Bet rieb /06 0-0 020 -00 20- 0030 Einse tzen v on Zub ehö r @ 7\m od_ 130 7433 664 200 _68. docx @ 44 349 @ 4 @ 1
6.2.2.3 Installation of accessories
• Only use inserts that are suitable for the rotor (see chapter 11.1 -
"
Range of accessories
").
• All four buckets of the swing-out rotor need to be installed when
spinning.
• Always load the rotors symmetrically to avoid imbalance.
Centrifugation with different tube sizes
Working with different tube sizes is possible. In this case, however, it is
very important that the inserts are loaded symmetrically (see figure).
Fig. 12: Permissible loading of the swing-out rotor with different tube sizes
Centrifugation with low capacity
The tubes must be installed symmetrically so that the buckets and their
inserts are loaded evenly (see figure).
Fig. 13: Permissible loading of theswing-out rotor with low capacity
Pos: 131 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1
