6-16HS
6 Using the centrifuge
Version 06/2012, Rev. 1.0 • sb-kue
47
Translation of the original operating manual
Pos: 150 /10 0 Sigm a/10 0 BA Z entrif uge n (St anda rd mod ule)/ 060 Betrie b_Spinc ont rol L +S/Spinco ntr ol S ( Zent 7)/ 060 -00 30- 0030 -0 040 Auto matisc he Pro gr amm rot ation @ 1 2\mo d_1 336 718 285 484 _68. docx @ 64 401 @ 44 @ 1
6.3.3.4
Automatic program rotation
With the program rotation, programs can be run directly one after another.
• Select "Program rotation" in the "Setup" menu.
Fig. 24: Program rotation function
The current program is loaded and can be started. After the end of the run,
the next program will be loaded and started automatically. The rotation
ends with the first empty location and restarts from the beginning:
Example 1:
Loading of Test1
Rotation: Test1, Test2, Test3, Test1,...
Example 2:
Loading of Test2
Rotation: Test2, Test3, Test2,...
While the program rotation is active, an arrow is displayed in the program
field of the standard menu (see figure below).
Fig. 25: Automatic program rotation
Pos: 151 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1