![background image](http://html1.mh-extra.com/html/sigma/6-16hs/6-16hs_operating-manual_1267908042.webp)
6-16HS
6 Using the centrifuge
42
Version 06/2012, Rev. 1.0 • sb-kue
Translation of the original operating manual
Program rotation
See chapter 6.3.3.4 - "
Automatic program rotation
"
Runtime as of set speed
If this function is active, the runtime will not be measured until the set speed
is reached. The clock symbol " !" will be displayed in the runtime field.
Start delay
If the start delay function is active, the centrifuge will not start until the
preset time has elapsed. The symbol " " will be displayed in the runtime
field.
Display deceleration time
In the activated mode, the deceleration time will be displayed instead of the
runtime during and after the deceleration process. Below the time display,
the symbol "
" will be displayed. During a deceleration process, the
symbol flashes. Once the deceleration is complete, it is displayed in a
permanent manner.
Display
Temperature unit
• Select between °C (Celsius) and °F (Fahrenheit).
Language
Various languages are available.
If a language is selected by mistake, it can be changed on any screen as
follows:
• Press and hold the stop key.
• Turn the function knob one notch to the left and then one notch to the
right.
• Release the stop key. The window "Language" will be displayed.
• Select the desired language.
Speed/RCF fine and time fine
This menu can be used to preselect the set speed in steps of 1 rpm
(instead of 100 rpm), the RCF value in steps of 1 x g (instead of 10 x g),
and the set time in steps of 1 min or 1 sec (instead of 10 min or 10 sec).
NOTE
Regardless of the fine adjustment, the step size increases when the
function knob is turned quickly.