Version 08/2008, Rev. 1.7 - sb
page 27 of 75
English translation
5.1.2
Construction and Constructive Safety Measures
The centrifuge is installed within a solid construction. On the back, the lid is
secured by solid hinges and on the front by two separate lid locks.
5.1.3 Drive
The drive motor is a well-dimensioned, collector-less asynchronous motor.
5.1.4
Operation and Display
The display is a hermetically sealed LCD display. It is operated by way of two
rotary knobs and indicates the operating statuses.
5.1.5 Electronic
System
The microprocessor-controlled electronic system ensures a wide range of
adaptations of the centrifuge for various tasks. The following parameters can be
set:
•
Speed in steps of 1 or 100 rpm
•
Relative centrifugal force RCF in steps of 1 or 10 x g
•
Time between 10 sec and 11h 59min max.
•
Continuous run
•
Short run
•
Temperature range from – 10 ° C to + 40 ° C in steps of 1 °C
•
Acceleration and deceleration curves
•
Storage and call-up of programs
