- 13 -
- 14 -
Warning and Error Messages
The Sigma EQ Touch II is protected against many fault and operator errors, by a Multi-
Protection System. Faults/Errors are displayed on the LCD screen and they interrupt the
active process to protect the unit and the battery.
The battery has been connected with incorrect polarity.
The battery is not connected or the connection has been
interrupted.
Input Voltage Error. It is below or over the limit of 11
~
18V.
Charger Fault.
Total Voltage Too Low.
Total Voltage Too High.
An individual Cell Voltage is Too Low.
Warning and Error Messages (Continued)
An Individual Cell Voltage is Too High.
Balance Port Connector Error.
Charger is Overheating.
Power Exceeds the Limit in Digital Power Mode.
Current Exceeds the Setting in Digital Power Mode.
The Maximum Safe Time Limit has been Exceeded.
The Maximum Capacity Limit has been Exceeded.
External Temperature is Too High.
