- 3 -
- 4 -
Connection
Connection Diagram for Balance Charging/Storage/Discharge Mode
CAUTION!
Always ensure the battery you are charging meets the
specifications of this charger and that the charger settings are correct.
Failure to do so can result in excess heat and product malfunction.
This can lead to user injury or property damage.
Only operate on a fire resistant surface for both the charger & battery.
Always charge in a well ventilated area.
CAUTION! Always power ON the charger before connecting a battery to it or damage to
the charger and the battery may result.
1. Connect the Charger to an appropriate power source (AC or DC but
NEVER
both)
2. Make program selections in the charger for battery charging
3. Connect balance adaptor board to the charger balance socket
4. Connect the battery to the charger (connect main charging connectors before
connecting cell-balancing connectors, where used)
5. Start Battery Charging
Exterior
Performance Parameters
WARNING! Read the ENTIRE
instruction manual to become
familiar with the features of the
product before operating.
WARNING! Never leave the
charger unattended, exceed
maximum charge rate, charge
with non-approved batteries or
charge batteries in the wrong
mode. Failure to do so may
result in excessive heat, fire,
explosions and injury.
AC Input Voltage ...................................................................................................... 100
~
240V
DC Input Voltage ............................................................................................................ 11
~
18V
Charge Current ........................................................................................................... 0.1
~
10A
Discharge Current .....................................................................................................0.1
~
2.0A
Charge Power ....................................................................................................................80W
Discharge Power ............................................................................................................... 10W
Balance Current ............................................................................................................ 350mA
Balance Tolerance.........................................................................................................±0.01V
Charging Capability NiMH/NiCd...............................................................................1
~
16 Cells
Charging Capability LiPo/LiFe/LiIon .........................................................................1
~
6 Series
Pb Battery Voltage ...........................................................................................................2
~
20V
Discharge LiPo/LiFe/LiIon...................................................................................2.0
~
4.2V/Cell
Weight ...............................................................................................................................591g
Dimensions..................................................................................................140 x 180 x 56mm
Sigma EQ Touch II Charger as viewed from the left hand side
Balance Connector sockets:
High performance
integrated LiXX balancer
for 2S to 6S packs using a
suitable balance board
and leads, if not XH
Output sockets: Connect the
battery to be charged using
the supplied charge lead
connected to the 4.0mm
sockets.
CAUTION! Ensure correct
polarity!
Temperature Probe Socket
USB Update Socket
Servo
Test Socket
(- + Signal)
DC Input
11
~
18V
AC Input
100
~
240V
Cooling
Fan
USB
Output 5V
Touch Screen
Cooling
Air Inlet
