INTERMISSION
28
Front Right
Back Right
Front Left
Back Left
From this point onwards until the completion of the Y-axis rail assemblies, we will only show the steps for the
right
Y-axis rail. While you are assembling the right Y-axis rail, complete the steps again for the left Y-axis rail.
The following icon will be shown on each page where you should be
repeating the steps for the second rail, but mirrored.
Mirror Mode
Summary of Contents for LongMill MK2
