16
Install two v-wheel assemblies at the bottom edge
of the gantry - except this time, use two eccentric
nuts. When placing the eccentric nuts inside the
gantry holes, ensure the inner holes of the nuts are
oriented towards the bottom edge of the gantry
(pictured). Use the included wrench to keep the
nuts in place, while you use the Allen key to loosely
attach the v-wheels.
Use Wrench & M5 Allen Key
Summary of Contents for LongMill MK2
