Siemens WU P Series Instruction Manual And Installation Instructions Download Page 3

Page: 3 / 40

Contents

enInstruction Manual and Installation Instructions

Intended use. . . . . . . . . . . . . . . . .4

(

Safety instructions . . . . . . . . . . .5

Children/people/pets . . . . . . . . . . . . . 5

Installation. . . . . . . . . . . . . . . . . . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . 8

Cleaning/Maintenance . . . . . . . . . . . . 9

Environmental protection . . . . .11

Packaging/used appliance . . . . . . . . 11

Tips on economical use . . . . . . . . . . 11

Positioning and connecting . . .12

Included with the appliance . . . . . . . 12

Installation. . . . . . . . . . . . . . . . . . . . . 13

Safety instructions. . . . . . . . . . . . . . . 13

Installation surface . . . . . . . . . . . . . . 13

Installation on a base or a wooden

joist floor. . . . . . . . . . . . . . . . . . . . . . 13

Installation on a platform with

drawer . . . . . . . . . . . . . . . . . . . . . . . 14

Installing the appliance in a

kitchenette . . . . . . . . . . . . . . . . . . . . 14

Removing the transport locks. . . . . . 14

Hose and cable lengths . . . . . . . . . . 15

Water inlet. . . . . . . . . . . . . . . . . . . . . 15

Water outlet . . . . . . . . . . . . . . . . . . . 16

Alignment . . . . . . . . . . . . . . . . . . . . . 17

Electrical connection. . . . . . . . . . . . . 17

Before washing for the first time . . . . 18

Transportation. . . . . . . . . . . . . . . . . . 18

Getting to know the appliance 19

Appliance . . . . . . . . . . . . . . . . . . . . . 19

Control panel . . . . . . . . . . . . . . . . . . 20

Display symbols . . . . . . . . . . . . . . . . 21

Laundry. . . . . . . . . . . . . . . . . . . .22

Protecting your laundry and

appliance . . . . . . . . . . . . . . . . . . . . . 22

Sorting laundry . . . . . . . . . . . . . . . . . 22

Programme default settings. . . 23

Temp. °C. . . . . . . . . . . . . . . . . . . . . .23

rpm

. . . . . . . . . . . . . . . . . . . . . . . .23

Finish in

. . . . . . . . . . . . . . . . . . . .23

Additional programme
settings. . . . . . . . . . . . . . . . . . . . 24

speed/eco

(

. . . . . . . . . . . . . . . .24

Rinse+

. . . . . . . . . . . . . . . . . . . . .24

Easy Iron

. . . . . . . . . . . . . . . . . . . .24

Operating the appliance . . . . . . 25

Preparing the appliance . . . . . . . . . .25

Select programme/switch on the

appliance. . . . . . . . . . . . . . . . . . . . . .25

Placing laundry into the drum . . . . . .25

Measure and add detergent and

care products . . . . . . . . . . . . . . . . . .26

Start the programme . . . . . . . . . . . . .27

Childproof lock . . . . . . . . . . . . . . . . .27

Adding/removing laundry . . . . . . . . .27

Changing the programme . . . . . . . . .27

Cancel the programme . . . . . . . . . . .28

Programme end during rinse hold. . .28

Programme end . . . . . . . . . . . . . . . .28

After washing. . . . . . . . . . . . . . . . . . .28

Appliance settings . . . . . . . . . . 29

Cleaning and maintenance. . . . 30

Appliance housing/control panel. . . .30

Drum . . . . . . . . . . . . . . . . . . . . . . . . .30

Descaling . . . . . . . . . . . . . . . . . . . . .30

Detergent drawer and housing . . . . .30

Cleaning the measuring aid A for

liquid detergent . . . . . . . . . . . . . . . . .31

Drain pump is blocked . . . . . . . . . . .31

The drain hose at the siphon is

blocked . . . . . . . . . . . . . . . . . . . . . . .32

Filter in the water supply is

blocked . . . . . . . . . . . . . . . . . . . . . . .32

Summary of Contents for WU P Series









































Search results

Summary of Contents for WU P Series

Reviews:

Related manuals for WU P Series

Brands by name

Popular brands

Siemens WU P Series, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WU P Series

Reviews:

Related manuals for WU P Series

Brands by name

Popular brands