Appliance settings
en
29
Q
Appliance settings
Appliance settings
You can change the following settings:
■
The volume of the end signal.
■
The volume of the button signal.
■
Switching the drum care information
signal on/off.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the programme selector to
position 1. The appliance is switched
on.
2.
Touch and hold the
A
Start/Reload
button and, at the same time, turn
the programme selector clockwise to
position 2/3/4. Release the
A
Start/Reload
button.
The setting mode is activated and the
preset setting appears in the display
panel.
Changing the volume and drum care
information
Use the
Finish in
û
button to change
the following settings at the
corresponding programme selector
positions:
■
2: The volume of the end signal.
■
3: The volume of the button signals.
■
3: Switching the drum care
information signal on/off.
Exiting setting mode
You can now end the process and set
the programme selector to the
$
Off
position. The settings are saved.
1/2/3/4...
positions on the
programme selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Ž
on
Œ
off
Summary of Contents for WU P Series
Page 39: ...6 ...
