Siemens WU P Series Instruction Manual And Installation Instructions Download Page 12

Page: 12 / 40

Positioning and connecting

Positioning and

connecting

Positioning and connecting

Included with the appliance

Note:

Check the appliance for transport

damage. Never use a damaged

appliance. If you have any complaints,

contact the dealer from whom you

purchased the appliance or our

customer services.

* Depending on the model

In addition

a hose clamp (24 - 40 mm diameter,

available from specialist dealers) is

required to connect the water drain

hose to a siphon.

Useful tools

■

Spirit level for aligning

■

Spanner with:

– WAF13 for loosening the

transport braces, and

– WAF17 for aligning the appliance

feet

Mains cable

Bag:

■

Installation and operating

instructions

■

Warranty

■

Supplementary sheet for the

installation and operating

instructions*

■

Bottom cover instruction*

■

Home Connect Installation

Guides*

■

Cover caps for openings after

the transport braces have

been removed

Water drain hose

Water supply hose on standard/

Aqua-Secure models

Screw*

Bottom cover*

Summary of Contents for WU P Series









































Search results

Summary of Contents for WU P Series

Reviews:

Related manuals for WU P Series

Brands by name

Popular brands

Siemens WU P Series, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WU P Series

Reviews:

Related manuals for WU P Series

Brands by name

Popular brands