en
Operating the appliance
28
Cancel the programme
For programmes at high temperatures:
1.
Touch the
A
Start/Reload
button.
2.
To cool down laundry: Select
Rinse
.
3.
Touch the
A
Start/Reload
button.
For programmes at low temperatures:
1.
Touch the
A
Start/Reload
button.
2.
Select
Spin
.
3.
Touch the
A
Start/Reload
button.
Programme end during rinse
hold
If you set spin speed to- - - (- - - = no
drain), the symbol
0
- - - and
Õ
appear
in the display panel and the
A
symbol
flashes.
Continue the program by:
■
Touching the
A
Start/Reload
button (the laundry will be drained
with the default spin speed setting)
or
■
Selecting a spin speed or set the
program selector to
Spin
and then
touching the
A
Start/Reload
button.
Programme end
End
appears in the display panel and
the symbol
Õ
and
A
disappear.
If you set spin speed to 0 (0= “No
spin”). The water is only drained.
After washing
1.
Set programme selector to
$
Off
.
2.
Open appliance door and remove
laundry.
Note:
Not required for Aqua-Stop
models.
3.
Turn off the tap.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
Summary of Contents for WU P Series
Page 39: ...6 ...
