NL Troubleshooting
Malfunction
Program does not start.
Cause and Troubleshooting
1.
Close the door.
2.
To start the program, press Start/Refill
.
Child lock is activated.
▶
"Deactivate child lock", page 34
- Ready in + is activated.
▶
Check if - Ready in + is activated.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Refill
.
Door cannot be
opened.
is activated.
▶
Resume the program by Centrifuge or Drain to
choose and press Start/Refill
too busy-
know.
"Resume program at rinse hold", page 33
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Select a suitable program for draining.
Power cut.
▶
Open the door with the emergency release.
Washing water is not
pumped out.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
Drain pump is clogged.
▶
"Cleaning the drain pump", page 39
is activated.
46
Summary of Contents for WM6HXM71NL
Page 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Page 59: ......