Troubleshooting NL
Malfunction
burns.
Cause and Troubleshooting
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Select a suitable program for draining.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Refill
.
flashes.
Door is not closed.
1.
Close the door.
2.
To start the program, press Start/Refill
.
All other error codes.
Malfunction
▶
Please contact customer service.
"E:30/-20"
Solenoid valve defective.
▶
Please contact customer service.
Detergent dosage is too high.
▶
Reduce the amount of detergent for the next wash
with an equal load.
Additional water filled.
▶
Do not fill the device with additional water during
operation.
Device not working.
Mains plug of the power cable is not plugged in.
▶
Connect the appliance to the mains.
The fuse in the fuse box has tripped.
▶
Check the fuse in the meter box.
Power supply has failed.
▶
Check whether the interior lighting or other
appliances are working.
Program does not start.
Start/Refill
was not pressed.
▶
Press Start/Refill
.
Door is not closed.
45
Summary of Contents for WM6HXM71NL
Page 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Page 59: ......