Siemens WM16XME2FG User Manual And Installation Instructions Download Page 6

Page: 6 / 56

NL Safety

▶

If the power cord is too short, contact customer service.

▶

Only use adapters approved by the manufacturer.

WARNING ‒ Risk of injury!

The heavy weight of the device can cause injuries when lifted.

▶

Do not lift the device alone.

If this appliance is installed incorrectly in a washer-dryer column,

the installed appliance may fall.

▶

Stack the dryer on top of a washing machine only with the dryer

manufacturer's connection kit. No other method of installation is

allowed.

▶

Do not install the appliance in a washer-dryer column if the dryer

manufacturer does not offer a suitable connection set.

▶

Do not install appliances from different manufacturers and with

different depths and widths in a washer-dryer column.

▶

Do not set up a washer-dryer column on a platform, the

devices can tilt.

WARNING ‒ Risk of suffocation!

Children can pull packing material over their head and become

entangled and suffocate.

▶

Keep packaging material away from children.

▶

Do not let children play with packaging material.

CAUTION ‒ Risk of injury!

The device may vibrate or move during operation.

▶

Set up the device on a clean, flat and solid surface.

▶

Level the appliance using the appliance feet and a spirit level.

There is a tripping hazard with incorrectly laid hoses and mains

connection cables.

▶

Lay the hoses and connection cables in such a way that they cannot

be tripped over.

Summary of Contents for WM16XME2FG

























































Search results

Summary of Contents for WM16XME2FG

Reviews:

Related manuals for WM16XME2FG

Brands by name

Popular brands

Siemens WM16XME2FG, User Manual And Installation Instructions

Search results

Summary of Contents for WM16XME2FG

Reviews:

Related manuals for WM16XME2FG

Brands by name

Popular brands