Siemens WM16XME2FG, User Manual And Installation Instructions

Page: 21 / 56

Before first use NL
V
6
about itfirst use
a After the program end, it shows
display: -0-.
Before first use
V
B
for the first use
prepare the device for use.
8.
Start the first wash cycle or press to
switch off the appliance.
→
"The Ministry in essence",
Page 31
6.1 Start the wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
1.
Press .
The power-on process takes a few
seconds.
2.
The program Cleaning the drumSet
up.
3.
Close the door.
4.
Pull out the detergent drawer.
5.
Fill powder detergent into
compartment II.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
6.
Slide in the detergent drawer.
7.
Press Start/Refill to start the
program.
a The display shows the remaining
program duration.
21