Siemens WM16XME2FG, User Manual And Installation Instructions

Page: 42 / 56

NL Troubleshooting
Malfunction
Program does not start.
Cause and Troubleshooting
2.
Remove trapped laundry.
3.
Close the door.
4.
To start the program, press Start/Refill.
Door cannot be
opened.
is activated.
▶
Resume the program by Centrifuge or Drain to
choose and press Start/Refill to push.
→ "Resume program at rinse hold", page 33
Temperature is too high.
▶
Wait for the temperature to drop.
▶
→ "program cancel", Page 33
Water level is too high.
▶
Start the program pump down.
Power cut.
▶
Open the door with the emergency release.
→ "Emergency release", page 48
Washing water is not
pumped out.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
Drain pump is clogged.
▶
→
"Cleaning the drain pump", page 35
is activated.
▶
Resume the program by Centrifuge or Drain to
choose and press Start/Refill to push.
→ "Resume program at rinse hold", page 33
Water drain hose is connected too high.
▶
Install the water drain hose at a maximum height of 1
meter.
Pump cover not assembled correctly.
▶
Assemble the pump cover correctly.
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
Reduce the amount of detergent for the next wash
with an equal load.
42