Siemens WM16XME2FG, User Manual And Installation Instructions

Page: 17 / 56

Set up and connect NL
plastic stand
pipe with rubber
run muff or a
floor drain
the water drainage
feeding hose with
a bend
fixate and
gene.
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
4.7 Adjusting the device
To reduce noises and vibrations and to
prevent the device from walking, place
the device horizontally.
1.
Loosen the lock nuts with a SW17
open-end wrench.
All appliance feet must be firmly
planted on the floor.
3.
Tighten the lock nuts against the
housing with an open-end wrench
SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.8 Connecting the appliance
electrically
1.
Insert the mains plug of the
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data of the device
can be found in the technical data
→ Page 51.
17