Siemens VersiCharge Ultra 175, Site Installation Manual

Page: 10 / 24

3. Resources
3.1 Tools and consumables
3.1.1 Tools
• Network Termination Equipment
• Electric Hydraulic Cable Lug Terminator
• 100m hook-up wire
• 4 x 1 Tonne (minimum) rated Lifting Straps.
• Rags
• Electric caulking gun
• Drill
• Torque Wrench
• Step ladder
• Table
• Chair
• General tools:
0 Spanners
0 Shifters
0 Socket Set >24mm
0 Screwdrivers
0 Side cutters
0 Hex Keys
0 Knife
0 Multi-grip pliers
3.1.2. Consumables
Ensure that the appropriately sized cable termination lugs for the AC and DC installation wiring are procured, as well
as the required heat-shrink to demark three phase AC cabling, high powered DC cables, and protective earth cables.
Glands for customer cabling to and from the IPU must also be installer supplied. Glands for the user unit are supplied
the installation kit for that region.
Catalog Description Quantity
12942 OR 12943 VersiCharge 175 kW Fast Charger Installation Kit (CID is region dependent).
Note: Does not contain any DIN standard lugs -
5542 UL Listed CABLE TIE, Yellow, 100X2.5MM, PK100 200
6234 UL Listed CABLE TIE, 94V-2, 292MM x 4.8MM BLACK, PANDUIT, PK100 1
8405 Cable Ties, Black, 450 x 8mm, Heavy Duty, 100 pack 1
9543 Nofirno Cable Sealant -
9127 Cat 6A 10G Shielded Keystone SLIMLINE Jack. Toolless 180 degree IDC 2
9416 Cat 6A S/FTP LSZH 1.5m RJ45-RJ45 Network Cable: Blue 2
9565 Molex 44915 Series Number Cat6 8P8C Way Cable Mount RJ45 Modular Plug Male 2
5792 EJCC Copper Jointing Compound 125 ml
2567 Aluminium Jointing Compound 125 ml
Note: Due to difficulties shipping jointing compound, copper, and aluminium compound must be also be installer supplied, as needed.
VersiCharge Ultra 175™ kW Fast Charger | Site Installation Manual
10