Siemens Synco RMZ792 Basic Documentation Download Page 10 | Manualshive

Page: 10 / 52

background image

10/52

Building Technologies

Bus operator unit RMZ792

CE1P3113en

HVAC Products

1 Summary

03.04.2006

1.6 Important

notes

This symbol shall draw your attention to special safety notes and warnings. If such
notes are not observed, personal injury and / or considerable damage to property can
occur.

Synco™ 700 products may only be used for the control and supervision of heating,
ventilation, air conditioning and chilled water plant.

Prerequisites for flawless and safe operation of Synco™ 700 products are proper
transport, installation and commissioning, as well as correct operation.

Fuses, switches, wiring and earthing must be in compliance with local safety regula-
tions for electrical installations.

Preparation for use and commissioning of Synco™ 700 products must be undertaken
by qualified staff who have been appropriately trained by SBT HVAC Products.

Synco™ 700 products may only be operated by staff who have been instructed by SBT
HVAC Products or their delegates and whose attention has been drawn to potential
risks.

When wiring the system, the AC 230 V section must be strictly segregated from the
AC 24 V safety extra low-voltage (SELV) section in order to ensure protection against
electric shock hazard!

For storage and transport, the limits given in the relevant Data Sheets must always be
observed.
If in doubt, contact your supplier or SBT HVAC Products.

Synco™ 700 products are maintenance-free, apart from cleaning at regular intervals.
System sections accommodated in the control panel should be freed from dust and dirt
whenever normal service visits are due.

Should system faults occur and you are not authorized to make diagnostics and to
rectify faults, call your Siemens customer service.

Only authorized staff are permitted to make diagnostics, to rectify faults and to restart
the plant. This also applies to work carried out within the control panel (e.g. safety
checks or replacement of fuses).

The products contain electrical and electronic components and must not be
disposed of as domestic waste.

Local and currently valid legislation must be observed

Field of use

Proper use

Electrical installation

Commissioning

Operation

Wiring

Storage and transport

Maintenance

Faults

Disposal

«
...
8
9
10
11
12
...
»

Summary of Contents for Synco RMZ792





















































Reviews:

No comments

Related manuals for Synco RMZ792

Brand: S&C Pages: 40

Brand: Lattice Semiconductor Pages: 30

Brand: WAFER Pages: 15

Brand: K&K Pages: 6

Brand: FAAC Pages: 32

Brand: jablotron Pages: 22

Brand: jablotron Pages: 2

Brand: KaRo Pages: 12

Brand: X Rocker Pages: 38

Brand: Linear Technology Pages: 7

J1000 CIMR-JC series

Brand: YASKAWA Pages: 25

Brand: MaintTech Pages: 28

Brand: Sartorius Pages: 165

Brand: Argo-Hytos Pages: 38

Brand: Anest Iwata Pages: 8

Brand: Texas Instruments Pages: 25

SCENE MASTER - V1.0

Brand: JBSYSTEMS Light Pages: 24

Brand: CALEFFI Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands