Siemens SIWAREX FTA, Device Manual

Page: 111 / 207

Weighing Functions
SIWAREX FTA
5-99
Name Type Address Default Range of Values / Explanation Reference
Bits 1 to 7 not used
Selection for type of
controller
BYTE DBB061 0 0: No control for switching off the rough-/fine-signal
1: Proportional controller without fine signal time
controller
2: Proportional controller with fine-signal time
controller
3: Fine signal time controller without proportional
controller
Other definitions not permitted.
5.16.29
Control factor
Proportional controller
BYTE DBB062 30 [0…100 %]
Other definitions not permitted.
5.16.30
Reserve 5a BYTE 1 0 Reserve 5a
Maximum one-time
control access
REAL DBD064 1 Limitation for maximum one-time control access
of proportional controller
5.16.31
Controller optimum Plus REAL DBD068 0 0…WR
max
Controller optimum Minus REAL DBD072 0 0…WR
max
5.16.32
Set value for fine time TIME DBD076 3000 Definition of set time for the fine signal-time controller 5.16.33
Control factor fine time
controller
BYTE DBB080 20 0...100 [%]
Other definitions not permitted.
5.16.35
Reserve 6 BYTE DBB081 0 Reserve 6
Empty
Reserve 7 WORD DBB082 0 Reserve 7
Overlapping time TIME DBD084 0 The overlapping time must be less than the
emptying time The next scale start can be
performed early by the amount of overlapping
time, while emptying
5.16.36
Emptying time TIME DBD088 0 0: Emptying depending on empty range
>0: Empty after defined time
5.16.37
Maximum emptying time TIME DBD092 2 sec 0: Monitoring switched off
>0: After the emptying time has elapsed and the
empty range has not been achieved, a technology
error is output
5.16.38
Filling
Filling with coarse BYTE DBB096 0 0: All weighing procedures in the loading
operation are controlled with coarse and fine
signal
1: The last 5 weighing procedures are run with
coarse and fine signals
2: The last 4 weighing procedures are run with
coarse and fine signals
4: The last 3 weighing procedures are run with
coarse and fine signals
8: The last 2 weighing procedures are run with
coarse and fine signals
16: The last 1 weighing procedure is run with
coarse and fine signals
Other values are not used
5.16.39
Reserve 8 BYTE DBB097 0 Reserve