Operation (hardware)
6.3 Menu structure
6.3
Menu structure
Loops overview
Heatmeter calculator is equipped with a data memory enabling comparison of previous
months’ readings with current readings.
To show data read out by integrator in display, various windows have been created as loop
functions that can be called up in succession to display plant information associated with
each window (e.g. energy amounts, operating hours, water amounts, current temperatures,
maximum values).
Heat meter display has six loops: main loop, reading day loop, information loop, pulse input
loop, tariff loop, and month loop.
Some display windows consist of two or more (maximum seven) display sequences
alternating every 2 to 4 seconds.
Note
For quick visual guidance, loops in display are numbered from 1 to 6.
Main loop with current data, e.g. for energy, volume and flow rate, is programmed as default
setting. It is possible to change order of contents of main loop. "Energy" window (sequence
1.1 in main loop) is the basic display.
2.1
2.2
2.3
2.4
2.5
2.6
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.10
1.9
5.9
6.1
6.2
6.3
3.1
3.2
3.3
3.4
3.5
3.6
3.8
3.10
3.11
3.9
6.24
1.14
1.10
3.7
6.4
6.5
6.6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.10
4.9
Figure 6-1
Menu loop overview
1.
Main loop
2.
Accounting date loop
3.
Information loop
4.
Pulse input loop
5.
Tariff loop (only visible if activated)
6.
Month loop
Display menu loops
The various loops will show the following information:
("OFF" means display menu is only visible if activated with SW tool, freely changeable)
SITRANS FUE950
Operating Instructions, 01/2010, SFIDK.PS.022.F4.02
39