Connecting
5.4 Connecting the FC410
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
41
Image 5-2
Sensor terminal compartment
9.
Reinstall the electronic including the mounting screw.
10.Connect the sensor connection and the sensor cable.
11.Restore the flexible strap around all wires.
12.Assemble and tighten the cable gland.
13.Remove the O-ring from lid.
14.Reinstate the lid and screw in until the mechanical stop. Wind back the lid by one turn.
15.Mount the O-ring by pulling it over the lid and tighten the lid until you feel friction from the
O-ring on both sides. Wind the lid by one quarter of a turn to seal on the O-ring.
16.Reinstate and tighten the lid lock screw.