Siemens SITRANS FC410, Operating Instructions Manual, Page: 103 / 160

Technical data
11.11 Cables and cable entries
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
101
11.11 Cables and cable entries
The following information applies to cables and cable glands supplied as accessories to the
device.
Table 11- 28 Power and signal cable, basic data
Description Specification
Number of conductors 4
Square area [mm
2
] 0.326 (AWG 22/7)
Screen Common shield for all 4 conductors
Outside color Gray (RAL 7001)
External diameter [mm] 6.5
Maximum length 600 m (1968 ft.)
Installation environment Industrial including chemical processing plants
Insulation material Special polyolefin
Halogen-free Yes
RoHS compliant Yes
Torsional strength
• >3 million cycles at ± 180° on 200 mm
•
Not adapted for garland mounting (festoon)
Permissible temperature range [°C (°F)] -40 to +80 (-40 to +176)
Min. bending radius allowed Single 5 X ø
Table 11- 29 Cable glands and entries
Description Specification
Glands
•
Material
–
Nylon 1)
– Brass/Ni plated
– Stainless steel AISI 316/1.4404
• Cable cross section
–
∅ 5 to 10 mm (0.20" to 0.39")
Entry
•
1 x M20 or 1 X NPT ½" for communication
1)
: If operating temperature is below -20 °C (-4 °F), use Brass/Ni plated or stainless steel
cable glands.
Note
For hygienic applications (3A & EHEDG) the cable glands and blind plugs must be made
from corrosion resistant material like nickel brass, stainless steel or plastic. The exposed
threads must be minimized when they are tightened up on the cable and they must have a
seal (plastic or rubber) under the threads where they screw into the terminal housing or
enclosure.