manualshive.com logo in svg

Siemens SITRANS F MAG 6000 I, Operating Instructions Manual, Page: 58 / 104

Share
Download
Siemens SITRANS F MAG 6000 I Operating Instructions Manual Download Page 58

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at: 
Service and support (

http://www.siemens.com/automation/service&support

) 

There you will find:
● The latest product information, FAQs, downloads, tips and tricks.
● Our newsletter, providing you with the latest information about your products.
● Our bulletin board, where users and specialists share their knowledge worldwide.
● You can find your local contact partner for Industry Automation and Drives Technologies

in our partner database.

● Information about field service, repairs, spare parts and lots more under Services.

Additional Support   

 If you have additional questions about the device, please contact your local Siemens 

representative and offices at:
Local contact person (

http://www.automation.siemens.com/aspa_app/contactmenu.aspx?

ci=yes&regid=DEF&lang=en

)

9.4

Return procedures

Enclose the delivery note, the cover note for return delivery and the declaration of 

decontamination form on the outside of the package in a well-fastened clear document pouch.  

Service and maintenance
9.4 Return procedures

58

SITRANS MAG 6000 I/6000 I Ex de

Operating Instructions, 08/2018, 

A5E02083319-AH

Summary of Contents for SITRANS F MAG 6000 I









































































































Reviews:

No comments