Figure 6-2
Capacitive touch keypad
Note
Isolate the device from power when removing the glass lid
If the glass lid is rotated during operation, the capacitive touch keypad automatically calibrates
to align the distance from lid to keypad. To avoid any unintended programming during this
calibration procedure, it is recommended to always isolate the device from power before
removing the glass lid and until it is properly fixed to the device again.
Mode field symbols
Communication mode
Language mode
Sensor characteristics
Service mode
Basic settings
Reset mode
Operator menu
Output
Operator-active
Product identity
External input
Operator-inactive
Lock field symbols
Ready for change
Access to submenu
Value locked
RESET MODE: Zero setting of totalizers and initializa‐
tion of setting
Keypad
The keypad is used to set the flowmeter. The keys function as follows:
TOP UP KEY
This key (when held for 2 sec.) is used to switch between op‐
erator menu and setup menu. In transmitter setup menu, a short
press will cause a return to previous level.
FORWARD KEY
This key is used to step forward through the menus. It is the
only key normally used by the operator.
Commissioning
6.1 Local user interface
42
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018,
A5E02083319-AH