Siemens SITRANS F M MAGFLO, Operating Manual, Page: 19 / 52

SITRANS F M MAGFLO
® ® ® ® ®
19 SFIDK.PS.026.E5.02
ENGLISH
Type Sensor with flanges
Nominal size mm DN 15 - DN 2000
Temperature of medium
1
) Temperature classification
Liner: T3 + T4 T5 T6
Neoprene (standard) 0 to 70
°
C 0 to 70
°
C 0 to 70
°
C
EPDM
2
)
−
10 to 95
°
C
−
10 to 90
°
C
−
10-75
°
C
Linatex
®
rubber
−
20 to 70
°
C
−
20 to 70
°
C
−
20 to 70
°
C
Ebonite
2
) 0 to 95
°
C 0 to 90
°
C 0 to 75
°
C
PTFE
−
20 to 100
°
C
−
20 to 90
°
C
−
20 to 75
°
C
Ambient temperature Remote transmitter:
−
20
°
C to 60
°
C
Operating pressure
3
)
[[[[[
abs.bar
]]]]]
Liner:
Neoprene 0.01 to 100 bar
EPDM 0.01 to 40 bar
Linatex
®
0.01 to 40 bar
Ebonite 0.01 to 100 bar
PTFE teflon:
DN 15 to 600: 0.3 to 40 bar
Excitation frequency DN 15 - 65: 6.25 Hz
DN 80/100: 3.125 Hz
DN 125 - 300: 1.5625
Hz
DN 350 - 1200: 3.125 Hz
Enclosure rating Standard IP67 to EN 60529 (NEMA 4X) (1 m w.g for 30 min.)
Option IP68 to EN 60529 (NEMA 6) (10 m w.g. cont.)
Cable entries 4 Pg 13.5
Mechanical load 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36
Test pressure 1.5
×
PN
Flanges
Standard
DN 15-50: PN 40
EN 1092-1:2001
4
) DN 65-150: PN 16
Rased face
DN 200-1000: PN 10
DN 1100 -2000: PN 6
Option
DN 65-1000: PN 6
DN 1200-2000: PN 10
DN 200-2000: PN 16
DN 200-600: PN 25
DN 65-600: PN 40
DN 50-400 PN 63
DN 25-350 PN 100
ANSI B 16.5 (
∼
BS 1560) 3/4"-24": Class 150 (20 bar)
3/4"-24": Class 300 (50 bar)
AS 2129 3/4"-48": Table D/E
AS 4087 PN 16 (DN 50 - 1200, 14 bar)
PN 21 (DN 50 - 600, 21 bar)
PN 35 (DN 50 - 600, 35 bar)
AWWA C-207 28"-78": Class D (10 bar)
Electrodes Standard AISI 316 Ti (1.4571)
Option Hastelloy C-276, Platinum / Iridium, Titanium, AISI 316 Ti Ceramic
Coated, Tantalum
PE - electrodes Standard As measuring electrodes (except PTFE)
Measuring pipe Standard AISI 304 (1.4301)
Option AISI 316 L (1.4404)
Flange and Standard Carbon steel
housing material
Corrosion-resistant two-component coating (min. 150
µ
m)
Option AISI 304 (1.4301) flanges and carbon steel housing.
Coating as above
Option AISI 316 L (1.4404) flanges and housing
Ex-approval See section 2.7 ; I
s
interface data see section 2.5
Conforms to PED, LVD, EMC PED - 97/23EC, LVD - 73/23 EEC +
amendment 93/68/EEC, EMC - 89/336 EEX
1
) The maximum fluid temperature may be further limited by the approval temperature ratings, see section 2.7
2
) With WRC (Water Research Council, UK) approval
3
) Maximum operating pressure decreases with increasing operating temperature and with stainless steel flanges
4
) EN 1092-1, DIN 2501 & BS 4504 have the same mating dimensions
4.2.2 Sensor MAG 3100 Ex
4. Technical data