8 Power supply system SITOP PSU8600 redundant
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
80
S
iem
e
n
s A
G
2
0
1
9
A
ll r
igh
ts
re
se
rv
e
d
8.5
Creating a process picture
Installing the SITOP library for PCS 7 also copied the block icons and faceplates
for the display of the PSU8600 on the OS. The "Compile OS" function generates
the corresponding block icons in the process picture.
Proceed as follows:
1. Create a new process picture or open an existing one (1) in the folder of the
technological hierarchy in which the CFC plan that you edited before is located.
Figure 8-12:
1
2. Execute the Compile OS function so that the process variables, the messages,
and the block icon in the OS project are generated.
3. Open the process picture using the WinCC Graphics Designer.
4. Draw the process picture as you want it to appear and position the PSU8600
(2) block icons and the digital display (3) at the intended locations in the
picture.
5. Save the adapted process picture and close it.
Figure 8-13:
2
2
3
