7 Power supply system SITOP PSU8600
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
59
S
iem
e
n
s A
G
2
0
1
9
A
ll r
igh
ts
re
se
rv
e
d
Configuring the hardware
Proceed as follows:
1. Drag the PSU8600 from the device catalog (1) onto the PROFINET IO system
of the AS.
2. Mark the PROFINET IO device and drag an extension module CNX8600, a
buffer module BUF8600 and a UPS module UPS8600 (2) to a free slot of the
basic module. A maximum of five slots per basic module are available.
3. Pull a battery into one of the slots of the UPS8600 module (3). A maximum of
five slots are available for batteries of the same type.
4. Open the properties of the PSU and enter the device name (4) and the
device’s address (5).
Figure 7-3
1
2
4
5
3
